The function of a faucet as a water distributor to your home is the reason why it is an important house fixture that you should always pay attention to. How do you maintain your faucet in good working condition? Fortunately, there are ways and tips that you can follow to determine the efficiency of your faucet and detect any problems as early as possible to avoid further damage.
What causes a faucet to stop working?
There are a number of reasons why your faucet suddenly stops working. But before making any major repairs, make sure to check all faucets inside your home. If you suspect one faucet is clogged, broken, or dislodged, inspect other faucets if they are working fine. If there are more faucets that are not working well, here are the possible reasons:
- Faucet design
There are different types of faucets and each has a different way of regulating water flow. Hence, check the design of the faucet you have at home as every design depends on springs, washers, notched balls, cartridges, and interlocking disks to control water.
- Water supply to the faucet
Another factor that you may also want to consider when your faucet isn’t working is to check for the water supply to the faucet. If shut off valves are both on and you notice the faucet is still not functioning well, try to turn them off, disconnect it from the faucet, and point the valves into a bucket before turning it on. If there’s water flow, then your faucet has a problem.
You can also ask your neighbors if you noticed water is not coming out from your faucets. Ask them if they’re experiencing the same problem.
- Low pressure
Your faucets may have low pressure and it may also be the result of an accumulation of mineral deposits in the pipes.
- Malfunctioning faucet
However, high pressure could also mean that your faucet is clogged with mineral deposits. This is due to the accumulation of deposits in the spout aerator that can be removed easily by soaking it in white vinegar.
- Frozen pipes
Frozen pipes can also prevent water from flowing through the faucet. You can unfreeze the pipes on your own or call a plumber to do it professionally.
- Pipe Leaks
The presence of leaks in the pipes may displace pressure and this may cause your faucet to stop working. Try to look for dripping or signs of rupture in your pipes and call a plumber to fix it.
How do I lubricate a faucet cartridge?
When you lubricate your faucet cartridge, there’s a kind of grease that you can apply known as the plumber’s grease. The texture is similar to petroleum jelly and it’s an efficient way to lubricate faucets.
Plumber’s grease lasts longer compared to other lubricating compounds. It’s waterproof, thus it is commonly used by plumbers when installing 0-rings and faucets. Additionally, plumber’s grease is the preferred material to fix noisy faucets as well.
It is recommended that homeowners should apply plumber’s grease to their faucet cartridges regularly to avoid rust and keep them from making noises. Before applying grease, clean the cartridge with paper towels. Then apply the grease around the cartridge. Once done, reassemble the parts back in place.
How do I know if my faucet is bad?
The following are tips that you can follow to check if your faucet is bad and needs to be replaced:
- Water with a bad smell and taste. Your faucet may have been worn out for long periods of time if you noticed an odd smell or taste in your water. If this happens, call a plumber to assess the problem and complete a faucet repair.
- Presence of molds. If you begin to see mold forming near your faucets, check your faucets for leaks. Leaks can lead to mold growth and this may greatly affect the quality of your water supply. Have your faucets replaced immediately if this occurs.
- Constant dripping. Faucets that constantly drip is due to high water pressure or a broken valve. This may indicate a damaged faucet, so have it replaced to save you money from increased water bills.
- Age of the faucet. Faucets can last for 15 to 20 years. If your faucets are nearing the end of its lifespan, then it’s time for a replacement.
- Frequent faucet repairs. A faucet replacement is a good solution for faucets who undergo frequent repairs.
How should I fix my faucet?
Fixing a faucet depends on the type of faucet design and sink. Regardless of what type you have, you can follow this basic advice to fix your faucet.
Before you go to work, here are some basic tools that you need for fixing:
- Rags- for easy cleanup
- White vinegar – to remove build-up in the spout
- Flat-head screwdriver – to remove the screws
- Replacement parts – to replace the worn-out components
- Adjustable wrench – for loosening valves and nuts
- Slip-joint pliers – for handling small faucet parts
Once you have the right tools, here are the steps to follow when fixing a faucet:
- Turn off the water supply. It should be done before doing repair work. Look for shutoff valves under the sink and turn them clockwise until they are tightly closed.
- Close the drain. Since you’ll be working on small parts of your faucet, avoid losing them down the pipe by closing the drain before you work.
- Take the system apart. To identify the location of the problem, you have to remove the parts and pay attention to the order and orientation of the parts as you remove them.
- Check all parts if it needs repair and replacement. This will help you decide if you’re going to buy new parts or completely replace the faucet.
- Clean those parts as you go. Once parts are removed, clean all seals and surfaces.
- Reassemble the faucet. Once you’re done repairing, reassemble all parts of your faucet
- Test the water flow. Turn the water back on after you finished the repair and let it run until it flows normally.
Contact United Plumbing & Drain for Faucet Repair and Installation Services in Tampa, Florida.
If you’re looking for reliable faucet repair, replacement, and installation services, consider reaching out to United Plumbing & Drain for a free estimate. Our plumbing company provides services for homeowners in the Tampa, FL area at affordable and fair rates.